Latest Cisco 200-301 Dumps, Verified Study Material 2020 Realexamdumps.com

Sample Question

Question #:1

Which set of action satisfy the requirement for multifactor authentication?

A. The user swipes a key fob, then clicks through an email link
B. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
C. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
D. The user enters a user name and password and then re-enters the credentials on a second screen

Answer: A



Question #:2

Two switches are connected and using Cisco Dynamic Trunking Protocol SW1 is set to Dynamic Desirable
What is the result of this configuration?

A. The link is in a down state.
B. The link is in an error disables state.
C. The link is becomes an access port.
D. The link becomes a trunk port.

Answer: D



Question #:3

When a floating static route is configured, which action ensures that the backup route is used when the primary route fails?

A. The floating static route must have a higher administrative distance than the primary route so it is used as a backup
B. The administrative distance must be higher on the primary route so that the backup route becomes secondary.
C. The floating static route must have a lower administrative distance than the primary route so it is used as a backup
D. The default-information originate command must be configured for the route to be installed into the routing table

Answer: A



Question #:4

When OSPF learns multiple paths to a network, how does it select a route?

A. It multiple the active K value by 256 to calculate the route with the lowest metric.
B. For each existing interface, it adds the metric from the source router to the destination to calculate the route with the lowest bandwidth.
C. It divides a reference bandwidth of 100 Mbps by the actual bandwidth of the existing interface to calculate the router with the lowest cost.
D. It count the number of hops between the source router and the destination to determine the router with the lowest metric

Answer: A



Question #:5

Which type of address is the public IP address of a NAT device?

A. outside global
B. outsdwde local
C. inside global
D. insride local
E. outside public
F. inside public

Answer: C

For More Information:

https://www.realexamdumps.com/cisco/200-301-practice-test.html